Seawater pH

Reference Designator
Start Depth
End Depth
Multi-Function Node
Current Status
PHSEN (Seawater pH)
Science Discipline
M2M Example
Method Data Stream Content Type
recovered_host phsen_abcdef_dcl_instrument_recovered Data Products Report M2M Stats Science
recovered_host phsen_abcdef_dcl_metadata_recovered Metadata Report M2M Engineering
recovered_inst phsen_abcdef_instrument Data Products Report M2M Stats Science
recovered_inst phsen_abcdef_metadata Metadata Report M2M Engineering
telemetered phsen_abcdef_dcl_instrument Data Products Report M2M Stats Science
telemetered phsen_abcdef_dcl_metadata Metadata Report M2M Engineering
Deployment Cruise Start Date Stop Date Mooring Asset Node Asset Sensor Asset Latitude Longitude Deployment Depth Water Depth
1 Review OC1404B 04/17/2014 08/16/2014 CGMCE-01ISSM-00001 CGINS-PHSEND-P0084 44.6583 -124.096 25 25
2 Review OC1410A 10/10/2014 04/12/2015 CGMCE-01ISSM-00002 CGINS-PHSEND-P0123 44.6583 -124.096 25 25
3 Review PS1506A 06/03/2015 10/07/2015 CGMCE-01ISSM-00003 CGINS-PHSEND-P0086 44.6583 -124.095 25 25
5 Review TN-342 05/18/2016 10/02/2016 CGMCE-01ISSM-00005 CGINS-PHSEND-P0125 44.6583 -124.095 24 24
6 Review AT37-03 09/30/2016 04/17/2017 CGMCE-01ISSM-00006 CGINS-PHSEND-P0085 44.6598 -124.095 25 25
7 Review SKQ201704S 04/19/2017 10/12/2017 CGMCE-01ISSM-00007 CGINS-PHSEND-P0084 44.6563 -124.095 25 25
8 Review SKQ201715S 10/12/2017 04/01/2018 CGMCE-01ISSM-00008 CGINS-PHSEND-P0123 44.6597 -124.095 25 25
9 Review SKQ201808S 04/03/2018 09/30/2018 CGMCE-01ISSM-00009 CGINS-PHSEND-P0125 44.6568 -124.096 25 25
10 Review SR1813 09/29/2018 CGMCE-01ISSM-00010 CGINS-PHSEND-P0120 44.6598 -124.095 25 25

No notes yet.

New Note

Metadata Start Date End Date Comment
4/17/14, 4:45 PM 9/30/16, 8:00 PM

All of the inshore surface moorings suffer from an issue called the 'top of the day problem.' A race condition exists in the CPM firmware when transferring daily log files harvested from the various sub-components in a buoy system (e.g. DCL16, CPM3, DCL35, etc) over the Iridium RUDICS connection. The primary CPM rsync's data files from the various sub-components to a central data directory. The first time a daily file is created/copied into that directory (usually shortly after midnight), a compressed copy of the file is created and that compressed file is queued up in a separate text file for transmission to shore. The transfer routine reads that text file and processes the files from that list in order from top to bottom. Once that compressed file is transferred to shore, no further updates for that file are sent to shore. Meanwhile, the CPM continues to rsync data from the different sub-components, updating the original daily log file. The net result is that data is accumulating in the daily log file for an instrument, but we may see only one record (or none) depending on when the rsync job occurred and the compressed file was created and staged for transfer to shore. This affects telemetered data only.

Id: 868 By: michaesm

8/7/16, 8:00 PM 10/3/16, 8:00 PM

Correcting the iridium data telemetry issues, permitting full telemetry of data files, resulting in greater power consumption than anticipated. Result is power level of the battery pack has dropped below operational limits and subsystems can no longer power instruments. Shutting the mooring down, and placing in a low power maintenance mode.

Id: 869 By: michaesm
Flag: not_operational Exclude: No

10/28/16, 8:00 PM 5/14/17, 8:00 PM

The file system on the SD card used by embedded Linux card comprising DCL35 became corrupted on Saturday, October 29, 2016. Affected instruments are: [ADCPT, PCO2W, PHSEN, PRESF, VEL3D]. All instruments are set to log internally. Will not receive telemetered data, but do not anticipate complete loss of data.

Id: 851 By: michaesm
Flag: not_available Exclude: No

12/11/16, 7:00 PM 5/30/17, 8:00 PM

On Monday, Mon Dec 12 15:30:00 2016, stopped receiving any data from CTDBP3. No indication as to possible cause.

Id: 870 By: michaesm
Flag: not_operational Exclude: No

2/5/17, 7:00 PM 4/30/17, 8:00 PM

The buoy and mfn battery voltages have been drawn down faster than expected. Have shutdown further power to DCL16, DCL17, CPM3, and DCL37 (DCL35 failed several weeks ago). This takes the following instruments offline:
CTDBP + DOSTA (probably internally recording)
FLORTNUTNR (probably internally recording)
PHSEN (probably internally recording)
PCO2W (probably internally recording)
VELPT (probably internally recording)

VELPT (probably internally recording)
ADCPT (probably internally recording)
PCO2W (probably internally recording)
PHSEN (probably internally recording)
PRESF (probably internally recording)
VEL3D (probably internally recording)
CTDBP + DOSTA (probably internally recording)
ZPLSC (probably internally recording)

Id: 871 By: michaesm
Flag: not_available Exclude: No

5/11/17, 8:00 PM 10/30/17, 8:00 PM

Lost communication with DCL35, on the MFN of CE01ISSM sometime after 2017/05/12 04:32:31.744. Reason unknown. Attempted to log into the system and establish both an ssh connection and a minicom session with no success. Minicom session showed zero activity, suggesting the system is completely offline. With the exception of the VEL3D, all instruments hosted by DCL35 are autonomous. No further data should be expected from: [ADCPT (recording internally), PRESF (recording internally), PC02W (recording internally), PHSEN (recording internally), VEL3D (status unknown)]

Id: 852 By: michaesm
Flag: not_available Exclude: No

Method: telemetered
Stream: phsen_abcdef_dcl_instrument
5/11/18, 8:30 AM 6/1/18, 7:30 AM

A review of the pH data and the signal and reference values suggests the system may have become blocked on May 11th through to June 1st. The blockage appears to have cleared, but the raw signal counts are still lower than ideal based upon the vendor documentation. Users should be cautious when using the data from this time period.

Id: 1470 By: wingardc
Flag: suspect Exclude: No

Method: telemetered
Stream: phsen_abcdef_dcl_instrument
12/15/18, 7:00 PM

The signal intensities for the PHSEN on the MFN have dropped well below the minimum level required by the manufacturer for a valid calculation of pH. All indications are that signal pathway has either fouled or become clogged with sediment. Resulting pH calculations should be considered suspect

Id: 1544 By: wingardc
Flag: suspect Exclude: No